Small Dual Laser Cannon

This laser cannon initially started on the center platform.  But now I am moving them to the main laser cannon platform.  Here is what they now look like.

It starts with a simple 4 x 6 plate and two hinges for the cannons.

A different view. I am using black because I want the insides to be dark.  Unfortunately it is hard to see the detail in these views.

Here the clear cannons are attached.  Later they will be fitted with LEDs.

Looking closely at the back, you can see 1x1 void.  This is for running the wires to the LEDs.

Here I added a 1x4 plate to connect the cannons together.  Eventually I added another to help make the inside darker.

Added the slopes.

 

Here I have added the walls.  There are two fluted bricks that are meant to be vents.  I used a sand blue one  to offset the color and make it stand out.  Then single tan one just fades in.

The problem with placing these fluted bricks at the end is shown above.  Don't like this.

 

So I moved it over by using 1x1 bricks on either side.

As you can see here there is no exposed edge as above.

This is the almost finished laser cannon.  Waiting on one part to arrive.

Center Platform (Update 2)

Here is probably close to the final design on the center platform.

 

Using the inverted radar dish on a small turntable, I have created a small remote controlled laser cannon.  Still need some more sand green slope parts to finish this detail and then duplicate on the other side.  Here is a closeup view

Also looking at whether the spotlights or a rotating laser cannon makes sense on the top structure.  Here is what that looks like.

I don't have another structure that the under carriage type laser cannon really fits. But at the same time the spotlight fits the purpose more.

Tulsa Maker Faire

We will be at the Tulsa Mini Maker Faire on Saturday August 25. Hope to see all of you in the Great state of Oklahoma.  Not sure what we will be showing, but keep watching this blog or follow us on twitter to see what is happening, @MyMakerTools and #MakerPower.

Center Platform (Update)

Trying some different ideas on how to fill this space.  Have been looking at dual cannon design from the Death Star set.  (For us old Navy types, looks a lot like the 5""-38 twin mounts on the original Iowa class battleship configuration).  Here are two views of the twin mount.on the center platform.

In this context the proportional size just does not look correct.  There is still work to do here.

Vertical Generator Build (Part 2)

Made more progress on the build.  There are two containment charging stations on either side, both located below the surface of the platform.  Each one has a space for the canister to be lowered into the charging area.  Inside of this will be several LEDs that will randomly flash when charging the canister.  Then there is a control room behind glass that a minifig will control.

Here is the control room.

and with the minifig in place.

a different view

some what better view of the control panel.

wide angle views from front and back

Here is what the generator looks like in dry fit.

Next job is to figure out the LED arrangement.  My first idea kind of melted on me, so I am regrouping on what to do.  More next time.

Vertical Generator Build (Part 1)

While I am waiting for parts to come in, I have started on motorizing the vertical generator.  Here is mock up. 

Here is the base broken down for working on the underlying infrastructure.

The front is at the top of the picture.  Here is another view.

The two cavities on either side will contain a work area with minifig(s) and LEDs to show a charging containment field.  The attention is lots of detail in each one.  The motor in the back will drive the generator.  I compressed the motor arrangement as much as I could, because their might be another motor in the front section.

Center Platform

While most of the center platform is done, there still remains a fairly large space on either side of the center steps.  My intention is that there will be no motors on this platform, but lots of lights.

Here was my first attempt at using that space.

The idea was to have a large formation of troops there.  This would have been 22 Minifigs.  I have that many Blacktron IIs, but that would have put a crimp on using them elsewhere.  My independent artistic consultant (my youngest son) did not like the idea at all.  So it is back to the creative well.